The Comprehensive ETABS Professional Course (RCC and Steel)

Training

Virtual

$ 100.001-250.000

Descripción

  • Tipología

    Training

  • Metodología

    Virtual

  • Horas lectivas

    21h

  • Inicio

    Fechas disponibles

"For Moderate/Expert Users
There are three types of Analysis covered in this Tutorial Series: Linear Static Analysis, Non-Linear Static Analysis (Pushover Analysis), Linear Dynamic Analysis (Response Spectrum Analysis) .The design codes covered are American and Indian Standards with Introduction to European Standards.
The important widely asked questions that will get answered in this lecture series are:
What is the difference between flexible and rigid diaphragms and how to assign the diaphragms to the RCC Slab ? , How to do P-Delta Analysis , How to do the Scaling of the Response Spectrum values to the Static Earthquake Analysis Values, How to Read the ETABS Editor File?, How to Design the Shear Wall?, How to Export the reactions to SAFE and Design the Raft in SAFE? . These questions are very important to understand for any Structural Engineer for designing any Structure in ETABS.
For Intermediate/Novice Users
You will start with the Basics Section- Instructor proceeds step by step through the process of drawing grids, defining stories, defining materials, defining section properties, drawing objects in the structural engineering models, defining loads, selecting load combinations with theoretical explanations and examples.
You will learn the basics of Soil Structure Interaction and designing basic Raft Foundation. Completing this Part will make you clear about the difference between Thin shell, Thick shell and Membrane, you also learn the Basics of Structural Dynamics.
You need to understand that this is not an easy to do course. You may need to repeat the course content of over 20 Hours over and over again to understand the course content. This course is only intended for Serious Students. Much efforts has been done to provide the practical understanding of the Software , which is not available anywhere on the internet , hence costlier than other courses on this platform.

Healthy Discussions and Queries are always Welcome inside. "

Información importante

¿Qué objetivos tiene esta formación?: "Linear Static Analysis of RCC Structures
Linear Dynamic Analysis of RCC Structures (Response Spectrum Analysis)
Non Linear Static Analysis of RCC Structures
Design of Industrial Heavy Structures
Design of Space Truss Structures
Design of 23 Storey RCC Building as per Indian Standards
Design of Raft Foundation in ETABS and SAFE
Export Reactions from ETABS to SAFE for Foundation Design
Design of Steel Structures as per AISC360 and IS800
Design of RCC Structures as per IS1893 , IS456 and IS13920
ETABS Editor File
Basics of Strucutral Dynamics and Tall Buildings Response
Modal Analysis of RCC and Steel Structures"

¿Esta formación es para mí?: "Civil/Structural Engineers and Students
Upgradation from STAAD to ETABS"

Requisitos: "System with ETABS Installed Basic Knowledge of Structural Engineering"

Sedes y fechas disponibles

Ubicación

Inicio

Online

Inicio

Fechas disponibles Inscripciones abiertas

Materias

  • Options
  • Design
  • Drawing
  • Engineering
  • Architecture
  • Building
  • Structures
  • ETABS
  • Model
  • Steel

Programa académico

"Design of Pre Engineered Building as per Indian Standards Introduction to Pre Engineered Buildings Draw a portal frame from one end to other as per Drawing Define Frame Section Properties Replicate the Whole Portal along the Width Replicate the Whole portal along the length Draw Gable End Structure for the Ends Draw Plan and Elevation Bracing Define Load Patterns Define Load Cases Define Load combinations Calculation of Dead, Live and Wind Loads Correct the Load Combinations Assign the Releases to the Structural Members Assign Supports to the Building Define Modal cases Define Analysis options and Analyze the Steel Structure Steel Sructure Design of Pre Engineering Building Structure as per IS800 Value Engineering of the PEB Shed Check the tabular results including Material Take off Linear Dynamic Analysis of a Billboard as per IS800 Modelling of a Billboard with free modelling approach Assigning the Section properties to all the members Assign End Releases and Supporting Conditions Define Load Patterns to the Steel Structure Define Wind Loads and Response Spectrum Loads to the Structure Define Load Combinations as per Auto Generate Option. Remove the Instability in the Modelling Process. (Tips and Tricks) Structural Design and Optimization of the Steel Structure Check the Mode shapes ,Mode partiipation and Weight of Steel Structure Linear Dynamic Analysis and Design of a Heavy Steel Structure for AISC 360 Introduction to Heavy Industrial Equipment Supporting Steel Structures. Define Grids and Stories Data with Frame Section Properties Draw the Silo Supporting Floor with Good Steel Structure Arrangement Draw Second Floor on the top of Silo Supporting Steel Structure Draw Roofing Structural Steel Arrangement Draw Vertical Elevation Bracing along the Minor Sway Direction Define Load Patterns for Steel Industrial Heavy Structure Define Load Cases and Load Combinations Define Modal Cases and Supporting Conditions Define Semi Rigid Diaphragms for all the floors Remove any kind of Errors and Rectification of Mistakes in Modelling Response Spectrum Analysis and Review of Mode Shapes Response spectrum Linear Dynamic Analysis and Design of Steel Structure Optimization of Structural Steel Member Sizes for Economy Design of Structural Steel Connections Linear Modal Analysis and Design of Steel Space Truss Structure as per AISC360 Modelling of Structural Steel Space Truss with Free Modelling Approach Assign Supporting Conditions , Section Properties and Loads to the Truss Remove any kind of Instability in the Truss by Check Model Option Eigen Modal Analysis and Modal Static Analysis of the Truss Design of Steel Space Truss as per AISC 360-16 Non Linear Static Analysis/Push over Analysis Introduction to the Pushover analysis (Non -Linear Static Analysis) Define Non-Linear Material and Section Properties Define Loads Patterns and Load Cases Analyze and Design the Structure Define Gravity and Push over Load Case Assign PMM hinges to the structure Analyze and Check the Model with Non Linear Pushover Load Case Study the Pushover Curve and Learn to Find Performance point Improve the Performance of the Structure 23 Storey High Rise RCC Building as per Indian Standards Learn to Read the Architectural Drawings Basic Introduction to the Methodology Enter the Grid Spacing in the model Enter the Storey Data in the model Define the Material Properties Define Reinforcement Bar Sizes Define Frame Sections Define Diaphragms , Pier Labels and Spandrel Labels Define Snap Options Model the RCC Columns and Shear Walls in the Structure Model the Cantilever Slab or Projections Define Supporting Conditions of the RCC Building Model the Retaining Walls Assign the Releases to the Structure Assign the Diaphragms to the RCC structure Check for Instability in the Structure Define Response Spectrum Function Define Dead Loads and Live Loads Introduction and Explaination of IS1893:2016 Define Earthquake Load Pattern Define and Assign Wind Load Patterns Define the Mass Source Define Super Imposed Dead Load , Dead Load and Live Load Define Staircase and Super Imposed Dead Loading Assign live Load Reduction factors Define Response Spectrum Load Case and Modal Cases Define P-Delta Options Define Load Combinations Understand the ETABS Editor File Set the Analysis Options Remove the instability Error Review the Fundamental Mode Shapes Correct the Mode Shapes Check the Static Base Shear Review the Dynamic Parameters Reduce the number of Modes Design of RCC Beams and Columns"

The Comprehensive ETABS Professional Course (RCC and Steel)

$ 100.001-250.000